安裝在日本CHINO千野記錄儀AH4000上的180MM色帶84-0055說明由綠圖控公司提供，配套記錄紙EH-01001配套現貨批發

1. Preparation
(1) Make sure that the unit is turned ON and then press the key (recording OFF).
(2) The printer stops around the center and the ribbon holder moves backward.
(3) Prepare a ribbon cassette.
(4) Open the unit door.CHINO千野180MM色帶84-0055安裝說明綠圖控公司
(5) Open the display board in the direction same as the unit door.
2. Attaching ribbon cassette
(1) Insert a ribbon cassette to the left holder locker.
(2) Put the ribbon under the printer and push the right side of the ribbon cassette.
(3) Insert the ribbon cassette to the right holder locker.CHINO千野180MM色帶84-0055安裝說明綠圖控公司
(4) Make sure that the ribbon cassette is properly held by the left and right holder lockers.
(5) Turn the winding knob counterclockwise.
(6) Return the display board in place.CHINO千野180MM色帶84-0055安裝說明綠圖控公司
(7) Make sure that the unit is turned ON and then press the key (recording ON).
(8) Feed the ribbon a few centimeters while recording is ON. Check the ribbon feeding condition.
3. Preparation for ribbon cassette replacement
(1) Move the printer to the center and the ribbon holder backward as in the case of attaching a ribbon cassette.
(2) Open the display board in the direction same as the unit door.
4. Removing ribbon cassetteCHINO千野180MM色帶84-0055安裝說明綠圖控公司
(1) Pull the right side of the ribbon cassette to remove it from the right holder locker (see below tips for removal).CHINO千野180MM色帶84-0055安裝說明綠圖控公司
(2) Pull the ribbon out of the printer.
(3) Pull the left side of the ribbon cassette to remove it from the left holder locker.
Drive gear Ribbon Winding knob Direction of ribbon feed Right Left Under standard operating conditions (temperature: 23 ±2°C, humidity: 55 ±10%RH), it can last about three months. However, it may be shortened depending on temperature, humidity or use of the unit (chart speed, intervals of periodic data printing, etc.).
如需要中文版及其他服務請聯系我司綠圖控公司136-5077-9822